The principle of gluing fabric coating is almost no different from the gluing of conventional wallpaper.
Looking for trucks? We advise you to buy trucks at this link, where you will also find tractor trucks, semi-trailers, trucks.
First of all, you should prepare the walls (they should be leveled and have no damage in the form of cracks, swells, sinks, etc.д., and primed). The flooring should be cut into strips of the right length. If the backing is paper, then the adhesive needs to be applied to both the wall and the back of the covering. In this case, the lubricated with glue strip should be folded and left for a few minutes to soak in. If the coating is made on a fleece base, then the glue is applied only to the wall. This minimizes the chance of adhesive contact with the surface. The coating is carefully smoothed to remove creases and trapped air.
When finishing walls with a seamless textile covering all door trims, light sockets and switches must be removed first. Start gluing from one of the corners of the room. To do this, apply glue to a small vertical area and gently glue the material. Gradually in a similar way glued all the walls, including door and window openings, which are later cut out. If walls and corners are not perfect, you can glue the coating from corner to corner. But even in this case the number of joints is minimal. Seamless coatings are usually impregnated with Teflon compositions, which facilitates cleaning and reduces the likelihood of heavy contamination.
Leave a Reply