Imagine, while the Soviet Union sent a man into space, the United States was already using automatic washing machines with might and main. We learned about such a necessary thing relatively recently. But no one is surprised how quickly “automatic machines” gained popularity. Now such a washing machine is an absolutely necessary thing in everyday life. And for many, the moment when the car breaks down becomes a tragedy. This is the most discussed topic on various Internet forums. You can learn a lot of interesting things on the site rem-stir – repair of washing machines.
Today we will talk about the main “sores” of the washing machine, we will try to eliminate them ourselves. Using this site, you can also, in some cases, avoid contacting a service center or calling a master at home. The most common problems are the failure of the machine to turn on. Check the power supply first. As a rule, washing machines consume a lot of energy and the wires get hot. Possibly lost contact. It’s easy to install with any other working device. If everything is in order, then inspect the washing machine cord for connecting to the mains: it may be damaged.
You can fix other problems yourself. For example, an automatic machine may turn on, but the drum refuses to spin. First, check the loading hatch, whether it is tightly covered. But, most likely, the belt that connects the drum to the motor pulley flew off from the vibration. When you call the master for this procedure, which takes up to 20 minutes, you will be charged decent money. Try to unscrew the bolts on the back of the washing machine yourself and remove the malfunction.
The worst thing is when a puddle of water appears under the washing machine during operation. There may be two options. No, you don’t need Calgon. Better check the condition of the cuff of the loading hatch: the spring that holds it may have fallen off, or the rubber gasket has been damaged. In the second version, the problem may be associated with the powder loading compartment. Due to the fact that too much washing powder was added or it is low quality and poorly dissolved in the water supply tube with a powder forms a blockage. It is easy to remove it: first get the compartment, and then with the help of a pencil (but not sharp items, type of needles) Clean the blockage.
